Manufacture + Properties EUROLAST‚ is a cellular elastomer made from a special type of polyurethane. When needed EUROLAST‚ can be used for vibration decoupling between plates and strips or as a prefabricated spring element. EUROLAST elastomers display excellent properties when used as either pressure or thrust loaded springs. EUROLAST‚ grades with bulk densities of 150 to 980 kg/m3 are also available for conventional applications. However it is also possible to produce special ...

Sound The main characteristic of sound-absorption materials are: the cellular structure and the porosity. So when an incident sound-wave hit a material, a part will be reflected and a part absorbed from the cellular structure of the material moving the air mass containedin the alveolus. The relation between the absorbed energy and the one reflected is the acoustic absorption coefficient. Acoustic Impedant The main characteristic of the acoustic-impedant materials is the same as the sound-absorption ...

EURON Microcellular Polyurethane with the shortest compression set. Very good elastic return. High Resiliency for Energy Return and Slow Recovery for Controlled Shock Absorption. Rolls in width 1370 mm, thickness from 2 till 25 mm. Stardard density 340 kg/m3 (240-270-300-420 kg/m3 upon request) Different colours. Standard black - beige and blue for shoes/orthopedics. Used into the following fields: Car gaskets Dampening Orthopedics-shoes Elettronics ...

Warranty and safety on the filtration of air Filtrocell is an open-cell, cross-linked polyurethane foam on polyesther basis, which gives warranty and safety on the filtration of air, dusts and water. Art. 126/30 Applications Its calibrated cellular structure is fully open and assures a reproducible filtration efficency. The tridimensional structure allows a light dust hold-up and does not reduce the pressure drop. This foam can be shaked, washed, rinsed and used for more times. Art. 128/20 ...

Geranio sponge. NR natural rubber foam open cell. Sheets,tubes and balls made of natural rubber sponge, open cell. Applications: labelling-machines, feed-rollers,finger-damping, belts, painting rolls,concrete tube cleaning......

Sponge Rubber Sheets, rolls and profiles in sponge rubber, open or close cell. Smooth or cloth impression surfaces. Applications: Industries in general, computer mouse,brik-works,punching-tools, electronics, electromechanis...

Thermal Safety Insulating tubes and sheets anti-condensate, closed cell. Applications: Insulation and protection for heating, conditioning and cooling plants. Art. 250 Flexible, insulating sheet made of elastomeeric foam. Art. 255 Insulating tubes. ...

For a multitude of uses. Extruded, cross-linked, closed cell Polyethylene foam tubes for air-conditioning and cooling. Very good physical properties in static and dynamic field,softness, resilience, thermal deformation, shock-absorption. Thermal insulation, very low water absorption and steam permeability, resistance to atmospheric agent, no-pollution, chemical-inert. Applications: Navigation, sports accessories, packing, camping, building and car industry, gyms, swimming-pools, lighting, life-jackets ...

FOAMTUBE - FOAMTUBE/Film Insulating tubes made of extruded polyethylene foam - closed cell available with or without anti-scratch film coating - (Foam tube/film, with anti-scratch film). Applications: Thermal insulation for components of heating and conditioning plants, htdro-sanitary, current building. Standard color: grey - other colors: on demand. FOAMCORD Closed cell polyethylene foam rounds obtained by continuous extrusion, in rolls. Applications: To reduce the consumption when the employ ...

Mousse. Sheets, rolls, profiles and milled made of foam rubber -closed and open cell - with or without adhesive . (NR-SBR/EPDM/CR/NBR-PVC). Neoprene sponge to norm UL94-HF1-V0. EPDM sponge open cell. Punched pieces Some profiles and pieces obtained from Porocell cutted by means of water-jet-system. Some milled products Applications Thermal and acoustic insulation - sealing gaskets for liquids and gas suitable for doors and windows frames. Cushioning, waterproof. Sport and orthopaedia Bi-elastic ...

Safety to the high temperature. Sheets, rolls and profiles in Silicone rubber open or closed cell. Self-extinguishing Class 1 Temperature range -60%/+200°C Open cell: suitable for filtration Closed cell: suitable for insulation. Silicon sponge to FDA norm. On demand with adhesive on one side. Applications Soft and deformable gaskets for high temperature. It is indispensable in all the industrial sectors that need a very good thermal and acoustic insulation, according to the safety standard. ...

Softness and self-extinguishing Self extinguishing PVC foam rolls and foam profiles. Applications: Anti-condensate insulation (conditioning and cooling), acoustic insulation as mass on plates to eliminate the vibrations, on window and door frames, sealing stripes against water, dust and noise. Very good resistance to: ageing, oils, alcali, acids. ...

Safety and resistance to compression. Sheets made of closed cell Polyurethane foam. It is a completation of the compact Vulkollan (R) when a more deformability and a lower compression resistance are requested. Vulkocell has a density from 300 up to 650 Kg/m3 which allow a higher deformability as to other compact elastomers. Vulkocell is suitable to solve swinging problems. This is the result of a low absorption and a higher dynamic load capacity. Vulkocell characteristics assure: - larger work ...

SOLID RUBBER SHEETING Quality available :SBR-NBR-NEOPRENE-HYPALON-SILICONE-VITON Sheets and carpets made of compact rubber with and without insertion. Smooth or cloth impression surfaces. Insulating carpets. Standard dimensions: sheets: 1000x1000 mm rolls: h 1000/1200/1400/1500 mm width 5/10 mt lenght thicknesses. On demand width mm.2.000. up to 1,5 mm: +- 0,25 mm from 1,6 to 1,9 mm: +- 0,30 mm from 2 to 3,9 mm: +- 0,40 mm from 4 to 20 mm: +- 0,80 mm over 20 mm: +- 1,00 mm General information ...

Polyurethane with high maximum tensile strenght Material structure Sheets, rounds, sleeves, moulded pieces. Standard dimensions: - centrifuged sheets: 520x3050/3600 mm - casted sheets: 500x500 e 1000x1000 mm - rounds: lenght 300/500 mm - sleeves: lenght 300/500 mm - moulded pieces on drawing - rectangular shaped lists: on demand ...

Compact and Sponge rubber extruded,new production co-extruded with or without wire metal inside. Rounds, half-round, rectangular and square shaped, according to customers drawing. About 8.200 tools available. Applications Industries in general. Technical Data Curing processes: autoclave, L.C.M., salts, U.H.F., micro-waves, infrared. Compounds: E.P.D.M.,SBR, NBR,Hypalon®,Neoprene(CR), NR-Para,Viton®, Silicone,Platinium Silicone,HNBR,Vamac. ...

Moulded rubber pieces SBR, NBR, Neoprene (CR), EPDM, NR - Para, Viton (FPM), Silicone. Moulds Design and construction by qualified mould-makers . Standard dimension of the moulds: 1.000 x 1.000 mm max Max piece weight 5 Kgs ...

Safety flooring suitable for playgrounds composed by an upperlayer of 10 mm made of rubber granulates agglomarated and anlower layer of 15 or 30 mm made of foam rubbers mix having a good shock absorption property. Agglo-eco-play has exceeded the tests provided for by the rule UNI EN 1177 for the Head Injury Criterion. It is easily laying by means of glue (on smooth surfaces). Density: Upper layer 700 Kg/m3 Lower layer 220 Kg/m3 COLOR:Black Properties: Very good shock absorption Comfortable on ...

Agglomerate of expanded elastomer that can be used, thanks to its resistance to fire, like thermal and acoustic insulation. It ís possibile to obtain from this product high densities, from. 120 to 200 Kg/mc, that give a great power of soundproof without the utilizing of other panels and with a consequently cost reduction. It can be also used as: - thermal insulation on floors, roofs, plumbings - stuffing for couches and chairs in that it is fire resistant Finally,Agglo-Isocell is produced ...

Agglomerate of flexible Polyurethane foam, suitable to be used in a large range of fields, due to ìts different propertìes: - open cell - easy to shape - flexibility - compression resistance - range of density from 70 up to 240 kg/m3 Applications: - thermal and acoustic insulation - packing - stuffing and filling for furnishing - stuffing for sport articles - stuffing for sport installation protection Agglomix Pu and Agglo Rubber panels can be coupled to obtain a noise reductíon ...

Agglomerate composed by industrial remnants of foam Polyethilene and E.V.A. with a density of 200 kg/m3 ( by request other densities) which allows the use as interspacing between dividing walls, with soundproofing property. Its very good elasticity, compactness and compression resistance allow the employ in floors foundation as a soundproofing. This article ìs UV resistant and consequently useful for outdoor applications....

Agglomerate composed by industrial EPDM/neoprene foam scrab with a density of 200 kg/m3 which allows the use as interspacing between dividing walls, with soundproofing property. It is suitable for the production of couches and armchairs. Its very good elasticity, compactness and compression resistance allow the employ in floors foundation as a soundproofing. This article ìs UV resistant and consequently useful for outdoor applications. On demand other density. ...

Agglomerate of rubber grains, elastic, resistant to compression and acoustic/thermal insulating. Applications: -antivibration in roads and railways foundations -acoustic insulation in building industry (inside walls and floors) -foundation and floor in the construction of sport buildings both indoor and outdoor ( gymnasiums and playgrounds) Technical Data: - Density: 70Okg/m3 - Working temperature range: -85 + 200 C - Resistant to: water, acids, sunlight and oils - Weather resistant, does not ...

Elastic foundation for synthetic grass and sport installations. It is composed by antishock and water drainage sheet made of rubber grains agglomerate and rubber mix joint connected on both sheets sides. This system allows the laying of the foundation without use of glue and tapes and it assure the absorption of expansion due to the thermic excursions. It avoids the sheets sliding caused from the user movements...